Manual Dimming Control - AMD Faders

Stylish and easy to use architectural DMX & Analogue manual dimming / fader control panels that integrate with most OEM or Anytronics CB, F Series and Pro-Dim dimming / switching packs.

AMD Fader - 1, 2, 3 and 4 Way Panels

All models fit a standard UK double patress box. Use 32mm deep back box.

  • Description

    • 5 Control options (see below)
    • 1 to +10V analogue electronic ballast control
    • 1, 2, 3 or 4 way horizontal manual faders
    • Robust 60mm metal construction sliders on 1, 2, 3 and
      4 way panels
    • Vertical or horizontal mounting
    • DMX, DSI and DALI 4 way versions available as 3 channels with Master (e.g. for RGB LED control)

     

    For a comprehensive data sheet and operating instructions go to the downloads tab.

  • Basic Specifications

    Weight: 0.5 kg

    Dimensions: Standard Double Pattress

     

    Complies with relevant parts of CE regulations

     

     

     

  • Downloads

    PDF Downloads

AMD Fader - 6 Way and 4 Way plus Master Panels

All models fit a standard UK double patress box. Use 32mm deep back box.

  • Description

    • 5 Control options (see below)
    • 1 to +10V analogue electronic ballast control
    • 6 way or 4 way plus master vertical faders
    • Robust 45mm on 4 way + Master and 6 way panels
    • Vertical or horizontal mounting
    • DMX, DSI and DALI 4 way versions available as 3 channels with Master (e.g. for RGB LED control)

     

    For a comprehensive data sheet and operating instructions go to the downloads tab.

  • Basic Specifications

    Weight: 0.5 kg

    Dimensions: Standard Double Pattress

     

    Complies with relevant parts of CE regulations

     

     

     

  • Downloads

    PDF Downloads

AMD Fader - 5 Control Options

1 to +10V Analogue Electronic Ballast (Current Sinking)

1 / 2 / 3 / 4 Channel

Linear Law supplied as standard, Square Law can be supplied on request.

0 to +10V Analogue (Current Sourcing)

1 / 2 / 3 / 4 Channel

The analogue version uses the +10V reference supply available from most of the Anytronics range of dimming packs to control between 1 and 4 channels of dimming.

DSI / DALI

1 / 2 / 3 / 4 Channel

The DSI and DALI versions provide from 1 to 4 channels of control for dimming fluorescent ballasts such as those used in our Anycolour system and Anycove overlapping cove lighting system. These systems provide colour controlled lighting and with appropriate choice of lamps can be used for office/retail and commercial lighting projects. In all these situations the AMD panel can be used to provide a local control facility.

The product requires a DC supply between 15 to 25V @ 100mA. Outputs can be on RJ12 socket or screw terminals for either type, please state when ordering. A mains powered version is available to special order.

Low Voltage DMX

1 / 2 / 3 / 4 Channel

The DMX version can be used to control dimming packs, Anycolour systems, and many LED and intelligent lighting systems. The standard start address is 1. External connections are made via an RJ45 connector or screw terminals.

The product requires a DC supply either directly from Anytronics product via RJ45 or on the screw terminals from a separate supply of between 9 to 25V @ 100mA, please state when ordering. A mains powered version is available to special order.

Low Voltage DMX

4 Channel + Master / 6 Channel

Identical to above DMX version but with external connections via RJ45 only.

NOTE: If this is not connected to Anytronics products an Anytronics AS180 power supply with DMX connectors will be required.

Anytronics Limited

5 & 6 Hillside Industrial Estate, London Road, Horndean, Hants, PO8 0BL United Kingdom

T +44 (0)23 92 599410  |  F +44 (0)23 92 598723  |  sales@anytronics.com

© Copyright Anytronics 2015   Terms and Conditions